Sysname Command; Systype Command - Matrix Switch Corporation MSC-DE3232 Product Manual

"Src1","AudSrc1"
"Src2",""
"Src3",""
"Src4",""
>SrcNames 1
"Src1","AudSrc1"
>SrcNames 1,2
"AudSrc1"
>SrcNames 1,2,""
>
The first 3 example commands are query commands. The last assigns an empty string to the second level of the
first source (thereby indicating that the first level label should be used).

3.11.44 SysName Command

NOTE: Superseded by the sys.name
Query or assign system name. The system name is provided for convenience when managing multiple Matrix
Switch Corporation systems. This value is stored and recalled on power up.
Command
SysName
SysName STR
Example for querying and assigning system name
>SysName
MSC-Router
>SysName "MyRouter"
>

3.11.45 SysType Command

Protocol Version: 2.3
NOTE: Superseded by the sys.arch
Query the system series type, which is currently defined as one of the following values:
Value Series name
0 Carina
1 Lupus
2 Lynx
3 Hydra
4 Pyxis
NOTE: This command was not added until version 2.3 of the Mascot protocol. On previous versions, this
Page 48 of 60
MSC-DE3232 Product Manual
System Paramete r
Description
Query system name.
Set system name (up to 15 characters).
System Paramete r
© 2013-2019 Matrix Switch Corporation
.
.
www.matrixswitch corp.com