Sysname Command; Systype Command - Matrix Switch Corporation MSC-HD44L Product Manual

Command
SrcNames
SrcNames SRC
SrcNames SRC, LEVEL
SrcNames SRC, LEVEL, LABEL
When querying names, labels are surrounded by double quotes and each level is separated by commas ',' (multi-
level systems only) and each source is separated by newlines. Secondary levels use empty strings to indicate
that the label of the first level should be used.
Examples
>SrcNames
"Src1","AudSrc1"
"Src2",""
"Src3",""
"Src4",""
>SrcNames 1
"Src1","AudSrc1"
>SrcNames 1,2
"AudSrc1"
>SrcNames 1,2,""
>
The first 3 example commands are query commands. The last assigns an empty string to the second level of the
first source (thereby indicating that the first level label should be used).

3.43 SysName Command

Query or assign system name. The system name is provided for convenience when managing multiple Matrix
Switch Corporation systems. This value is stored and recalled on power up.
Command
SysName
SysName STR
Example for querying and assigning system name
>SysName
MSC-Router
>SysName "MyRouter"
>

3.44 SysType Command

Protocol Version: 2.3
Query the system series type, which is currently defined as one of the following values:
Page 41 of 54
MSC-HD44L Product Manual
Description
Query all source names.
Query source names for all levels of a given source.
Query the name of a specific source and level.
Assign a label to a source.
Description
Query system name.
Set system name (up to 15 characters).
Copyright © 2013-2015 Matrix Switch Corporation www.matrix-switch.tv