System Parameters; System Parameter Table - Matrix Switch Corporation MSC-DE3232 Product Manual

Parameter
Src 1-N or 0
String String
Value
Table 6: Command Argument Types

3.7 System Parameters

MASCOT protocol version 3.0 adds commands for setting and querying configuration and other system
parameters. These commands greatly simplify the MASCOT command set and supersede several configuration
commands.
System parameter values can be set in Stored memory and/or Active memory. Stored values are loaded on
system startup. Active values are the current control values of the running system, but wont be retained after a
system restart if they differ from the Stored value.
Command Arguments
Get [Parameter]
Get S [Parameter]
Set [Parameter][Value]
S etA [Parameter][Value]
Set S [Parameter][Value]
Table 7: System Parameter Commands
Parameter identifiers are represented as one or more alphanumeric words separated by periods, representing a
tree structure similar to file folders or directories. Table 8 below describes the columns in the
Table.
Parameter Parameter identifier consisting of one or more words separated by periods.
Value Value type, see the
Access Parameter access. R for Readable settings, W for writable settings, or RW for both.
Set Default parameter memory used with the
both. Commands which use only Stored memory require a reboot to become Active.
Table 8: System Parameter Table Columns

3.7.1 System Parameter Table

Parameter Value
ctl.mascot.ver String
Page 23 of 60
MSC-DE3232 Product Manual
Parameter identifier. See
Source number (N = Count of sources), 0 acts as mute (if supported).
A generic string argument (max length depends on the command).
A general value. Value type depends on setting. See
Description
Query Active parameter values.
Query Stored parameter values.
Set Active/Stored parameter value (depends on parameter).
Set Active value of a parameter only.
Set Stored value of a parameter only.
Command Arguments
Access Set Description
R Mascot version in the form MAJOR.MINOR (3.0 for example).
© 2013-2019 Matrix Switch Corporation
System Parameters
section for details.
Set Command. A for Active, S for Stored, or AS for
.
System Parameters
System Parameter
www.matrixswitch corp.com
.