Panelcmd Command - Matrix Switch Corporation MSC-DE3232 Product Manual

Command
PairIO
PairIO 0 | 1
Example
>PairIO
0
>PairIO 1
>
The first command queries the current state of I/O pairing, the second enables it.

3.11.24 PanelCmd Command

Protocol Version: 3.0
Query and assign panel button/GPIO command macros. This system provides a means to easily implement
custom functionality in response to a panel button press or GPIO auxiliary port contact closure (button or switch
to ground). Panel buttons and GPIO pins are specified by numeric ID.
Panel buttons are numbered beginning with ID number 1. Panel button order depends on the panel, but
generally has the top left button as button 1, followed by number 2 in the lower left corner, number 3 in the top
second column, continuing to alternate between top and bottom rows till the last button (lower right hand
corner).
GPIO auxiliary pins start with ID number 65 for GPIO pin 1.
NOTE: Panel commands must be enabled with the
P arameter to activate them.
Command
PanelCmd
PanelCmd Button
PanelCmd Button Command
Examples
>PanelCmd
1 P0
2 P1
65 P0
>PanelCmd 1
1 P0
>PanelCmd 66,"P1"
Page 38 of 60
MSC-DE3232 Product Manual
Description
Query current value of I/O pairing configuration.
Enable or disable I/O pairing (0: disable, 1: enable)
PanelCmdEn Command
Description
Query all assigned panel button/GPIO commands.
Query a single panel button/GPIO command.
Assign a panel button/GPIO command. Assigning a blank command to a
button or GPIO pin will clear the command (two consecutive single or double
quotes represents an empty string).
© 2013-2019 Matrix Switch Corporation
or by setting the pnl.cmdEn
www.matrixswitch corp.com
S ystem