Lockstatus Command; Mac Command; Mapdest Command - Matrix Switch Corporation MSC-DE3232 Product Manual

Ip IP Set IP address of the system.
Example querying and assigning the IP address
>IP
192.168.2.60
>IP 192.168.2.61
>

3.11.13 LockStatus Command

Routers only
Query the video lock status and video rate of a Video Router's outputs. This command is only supported on
some Router systems. Unsupported systems will return an "Unsupported command" error on version 2.1 and
newer protocol versions and blank output on older versions.
Command Description
LockStatus Displays Video lock status and rate detection for outputs. Format is one decimal number
per output (0: Unlocked, 1: SD, 2: HD).
Example for a 16x4 system (SD, HD, Unlocked, Unlocked)
>LockStatus
1,2,0,0
>

3.11.14 MAC Command

NOTE: Superseded by the net.mac
Query system Ethernet MAC address.
Command Description
MAC System Ethernet MAC address in hh:hh:hh:hh:hh:hh where each hh is a pair of hex digits.
Example
>MAC
00:50:C2:8B:DF:FE
>

3.11.15 MapDest Command

Routers only – Protocol version 3.0
Query or assign matrix destination mappings. Destination mappings provide a means to remap logical
destinations to different physical destinations for an added level of convenience when allocating and defining
system I/Os.
Command
Page 31 of 60
MSC-DE3232 Product Manual
System Parameter.
Description
© 2013-2019 Matrix Switch Corporation www.matrixswitch corp.com