Installing The Cartridge Group - ABB A130-M65 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting
8.14

Installing the cartridge group

Rotating the cartridge group by 90° and removing the service support
Figure 43: Rotating the cartridge group by 90°, removing the support
1. Rotate the service support (90012) on a soft underlay with the cartridge group.
2. Loosen and remove nuts.
3. Pull the service support (90012) out of the cartridge group.
Attach lifting gear to the cartridge group
Figure 44: Attach lifting gear to the cartridge group
1. Insert screws from service support into cartridge group.
2. Secure ring nuts (VRM) onto the screws with washers.
3. Secure the lifting gear to the ring nuts and suspension eye as shown.
4. Lift the cartridge group vertically.
© Copyright 2015 ABB. All rights reserved. HZTL4031_EN
Page 90 / 115
Revision C February 2016