Removing Air Inlets - ABB A130-M65 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting
8.3

Removing air inlets

Marking casing position for assembly
ABB Turbo Systems recommends marking the casing positions prior to
disassembly.
NOTICE
Figure 29: Removing the air inlets
1. Loop around the filter silencer (81000) with lifting gear.
2. Loosen the V-clamp (72020).
3. Remove the filter silencer (81000) with the O-ring (81010) or the air suction
branch (82000) with the O-ring (82010).
© Copyright 2015 ABB. All rights reserved. HZTL4031_EN
Page 78 / 115
Revision C February 2016