Table of Contents
Advertisement
Operation Manual / 4 Product description / A130-M.. - A145-M..
8
Dismantling and fitting
8.13
Installing nozzle ring
Figure 42: Installing the nozzle ring
1. Fit the lamellar sealing ring (56005) and secure it with adhesive tape (01). When doing
this, pay attention to correct winding of the lamellar sealing ring (see detail A).
2. Insert the nozzle ring into the turbine casing with the cams facing downwards. Align the
cams on the nozzle ring with the recesses of the turbine casing (51000).
3. Insert the nozzle ring (56001) into the turbine casing up to the stop. Do not remove the
adhesive tape (01).
© Copyright 2015 ABB. All rights reserved.
HZTL4031_EN
Page 89 / 115
Revision C
February 2016
Advertisement
Chapters
Table of Contents
