Table 33 Swivel Lifting Eyes - ABB A130-M65 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting
Suspended loads
Loads that are not attached according to regulations can cause injury to
personnel or fatal accidents.
WARNING
Only fasten the turbocharger, assemblies or individual parts on properly

functional lifting gear with sufficient load limit.
Pay attention to the correct attachment of loads on the crane hook.

People must not stand under suspended loads.

Wear safety gloves against mechanical risks.
Wear safety helmet.
Definition of terms
 Suspension point
Defined loading point on a component or an assembly (blind hole thread, eyelet, lug).
 Assembly device
Devices that are fitted on the turbocharger in order to obtain a suspension point. Assembly
devices are specially constructed and designed for the defined use; they are not trading
goods. Use assembly devices only for the described applications.
 Lifting gear
Equipment for the lifting and transporting of loads (ropes, chain block, crane). Lifting gear
is not supplied by ABB Turbo Systems.
Swivel lifting eyes to be used
Two swivel lifting eyes are required for the safe lifting of loads, which are not supplied by
ABB Turbo Systems.
Swivel lifting eyes
Table 33: Swivel lifting eyes
© Copyright 2015 ABB. All rights reserved.
Product Thread
M
A130 M10 17 mm
A135 M10 17 mm
A140 M12 21 mm
A145 M12 21 mm
HZTL4031_EN
Page 75 / 115
Length Minimum load
L limit
100 kg
150 kg
250 kg
300 kg
Revision C February 2016
Quantity
2
2
2
2