Table of Contents
Advertisement
UPSI-1208DPx
A Brief specification
UPSI-1208DP3
12 V DC / 8 A
12 V DC UPS (DIN rail version)
LiFePO4 battery
Up to 6 000 cycles
Capacity: 25 Wh
Intelligent input current detection
Regulated output voltage in battery mode
Minimum load detection
Power-fail timer function
Relay dry contact on power fail
Reboot function
Fuel gauge
Shutdown via external signal
Te chn ic al Dat a
Input voltage
Input current
Output voltage
Output current
Capacitive load
Charging method
Protection
Interface
Battery technology
Ambient temperature
Temperature derating
Operating altitude
Max. permitted humidity
Dimensions W/ H / D
Weight
Revision 2-0
12 V DC (11.5...16 V)
9 A max.
Normal mode: V
– 0.6 V DC max. (depending on load)
IN
Battery mode: 12 V DC
8 A nominal
3000 µF (in normal mode, at start, 0 A load)
CC / CV / CP
Input: Reverse polarity protection
Output: Overcurrent protection, Short circuit protection
USB, RS232, HID UPS
LiFePO4 2.5 Ah / 25 Wh
Operating
Storage / Transport
-20...+50 °C
-30...+55 °C, recommended state of charge 80 %
See derating curve on page after next
≤4000 m
≤95 % (at +25 °C, no dew)
63 x 120 x 100 mm
(without front connectors and DIN-Rail mounting bracket)
0.6 kg
5
Advertisement
Table of Contents
