Accessing The Sim - Cal Amp LMU-2 30 Series Hardware And Installation Manual

LMU-2x20™ Hardware and Installation Guide

3.9 Accessing the SIM

The following instructions should be used when attempting to access the SIM in a GSM
LMU-2x30™.
1. Remove the top plate of the LMU-2x30™. The LMU-2x30™'s enclosure is held
together by 4 plastic clips. To remove the cover, squeeze the top plate of the LMU
near the 20 pin header and pull up then repeat this action near the SIM cover.
2. Remove the top-plate to expose the top-side of the LMU-2x30™'s main-board.
3. Align the SIM so the contacts are facing up and the notch is facing into the LMU-
2x30™
DO NOT TOUCH
THIS AREA
V1.0.10
Copyright ©Calamp Wireless Networks Inc 2010
When opening the LMU-2x20™ take care
to not to touch the GPS Patch Antenna as
an accidental ESD discharges may render
it inoperable.
Figure 12 - LMU-2x30™ SIM Alignment
CalAmp Proprietary & Confidential
- 29 -
December 12, 2010