Cal Amp Safe Fleet LMU 2630 LV Quick Install Manual

Installation Checklist
The following checklist will help you track the LMU installation process. Ensure that everything on this
checklist is verified before wrapping up.
Record Installation Details
Device ID
Bus ID
Odometer
Power Harness
Check for tight mounting of hardware and connections
LMU Position
Check for tight mounting of LMU
Label is facing outwards towards sky
LEDs
Ensure that both Comm and GPS LED light up solid
Recorder (Optional)
Ensure that DVR Firmware is compatible with the LMU
Service & Support
If your product is to be returned for service, please contact the Safe Fleet technical support team, provide the part and/or serial
# of your unit, and ask for a Return Merchandise Authorization (RMA) number.
An RMA # allows the support team to better track your product when it comes in for service. Please show the RMA # on the
outside of the package.
ANY PRODUCT SENT WITHOUT AN RMA # MAY BE REFUSED!
Documentation and Warranty
This guide along with other documentation and product warranties can be found on the Safe Fleet
Community website https://community.safefleet.net/
To access LMU documentation, scan the QR code on the right with your mobile device.
Contact Support
• Phone: 1-844-899-7366
• Email: PTsupport@safefleet.net
2002/96/EC (WEEE directive): This product cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return the product to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points, for more information, see www.recyclethis.info.
2006/66/EC (battery directive): This product does not contain batteries.
License Plate
Install Date
LMU 2630 Quick Install Guide
This guide provides instructions on how to install and set up
the Safe Fleet LMU (Location Messaging Unit) model 2630
(part # VLP-LMUV2Y1). This device sends GPS data over
cellular networks to an online web server, allowing customers
to track the location of their vehicles using software.
 NOTE: DVR Firmware Compatibility with LMU 2630
When installing the LMU 2630 with a Safe Fleet recorder,
you'll need to ensure that your recorder has the most
current firmware. To confirm your firmware version, please
contact Technical Support for assistance.
1 Record Vehicle Installation
Customers and installers should have received an Installation Record document (see sample below) with the
Device IDs column pre-populated. The Device ID (sometimes referred to as ESN) is a 10 digit number found on
the label of the LMU, and is required in order to properly provision and test your device.
If the Installation Record is unavailable, contact the fleet administrator for it or create a form and record the
following vehicle information for each LMU Controller that is installed.
Device ID:
License Plate No:
FDate Installed:
Bus ID:
Odometer:
Notes:
© Safe Fleet | May 2022 | All rights reserved | Part #: 700-1286 R1