Table of Contents
Advertisement
LMU-2x20™ Hardware and Installation Guide
Configuration and Activation
3.5 Configuration Quick Start Guide
This section details how to quickly get an LMU-2x30™ provisioned and configured to point
at a specific server. It is assumed that a PEG script has already been created and is being
managed through LMU Manager or PULS™, the CalAmp Maintenance System.
We are making three assumptions to simplify the setup process:
You have created, installed and configured an LM Direct™ Server to receive
messages from the LMU-2x30™. (See LM Direct™ Reference Guide for details)
You are using the standard wiring harness from CalAmp and the serial port
expansion harness.
You have created a HyperTerminal or Putty session as described in Appendix A and
B respectively
V1.0.10
Copyright ©Calamp Wireless Networks Inc 2010
CalAmp Proprietary & Confidential
- 23 -
December 12, 2010
Advertisement
Table of Contents
