Cal Amp LMU-2 30 Series Hardware And Installation Manual page 19

LMU-2x20™ Hardware and Installation Guide
3.1.1.4 Packaging
Anytime the sub assembly is shipped and it is not fully packaged in its final housing it must
be sealed in an ESD safe bag.
3.1.1.5 Electrical Over-Stress (EOS)
The GPS receiver can be damaged if exposed to an RF level that exceeds its maximum input
rating. Such exposure can happen if a nearby source transmits an RF signal at sufficiently
high level to cause damage.
3.1.1.6 Storage and Shipping
One potential source of EOS is proximity of one LMU-2x30™ GPS Antenna to another
LMU-2x30™ GSM Antenna. Should one of the units be in a transmit mode the potential
exists for the other unit to become damaged. Therefore any LMU-2x30™ GPS Antenna
should be kept at least four inches apart from any active LMU-2x30™ GSM Antenna or any
other active high power RF transmitter with power greater than 1 Watt.
V1.0.10 December 12, 2010
Copyright ©Calamp Wireless Networks Inc 2010 CalAmp Proprietary & Confidential
- 11 -