Table of Contents
Advertisement
DSP-FTA410
Users Manual
Configuring a Custom Fiber Test
In some cases, you might want to create your own custom test, rather than use
the standard tests stored in your test tool. The test tool's Configure Custom Test
function lets you define up to four custom fiber standards.
You can set the following parameters for fiber tests:
•
Custom test name
•
Test standard for default test values (To save time when creating a custom
test, you can base your custom test on a test standard or another custom
test.)
•
Multimode (50 µm or 62.5 µm) or singlemode cable type
•
Maximum length of the fiber
•
Maximum loss at 850 nm and 1300 nm
•
Maximum loss per adapter
•
Maximum loss per splice
•
Index of refraction (n)
Use Abort or e to exit the custom fiber test screens.
Use Set to Default to reset a value to the standard value.
38
Advertisement
Table of Contents
