Advertisement
Quick Links
Fluke Networks DSP-PM11A Specs
Provided by www.AAATesters.com
PMxx
Permanent Link Module
for the DSP/OMNI-LIA101
Permanent Link Adapter
Instruction Sheet
The PMxx Permanent Link Module makes a DSP/OMNI-LIA101
Permanent Link Adapter electrically compatible with a particular
manufacturer's jack.
Refer to the PMxx module list included for applications for this
module and other available modules. For the most recent list of
available modules, visit the Fluke Networks website at
www.flukenetworks.com.
PN 1611107 (English) April 2001, Rev. 2, 1/02
© 2001, 2002 Fluke Networks, Inc. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
Advertisement
Related Manuals for Fluke DSP-PM11A
Summary of Contents for Fluke DSP-PM11A
- Page 1 For the most recent list of available modules, visit the Fluke Networks website at www.flukenetworks.com. PN 1611107 (English) April 2001, Rev. 2, 1/02 © 2001, 2002 Fluke Networks, Inc. All rights reserved. Printed in USA. All product names are trademarks of their respective companies.
-
Page 2: Handling Information
Handling Information Caution To avoid latent or immediate damage due to electrostatic discharge: • Before handling a module or an adapter with no module attached, ground yourself when possible by touching a grounded, conductive surface. • Always remove the adapter from the test tool before changing the personality module. -
Page 3: Installation
Installation Attach the module to a DSP/OMNI-LIA101 adapter cable as follows (refer to Figure 1): Ground yourself by touching a grounded, conductive surface. Remove the link interface adapter from the test tool. Use your fingers to unscrew the screw on the personality module. -
Page 4: Maintenance
Static sensitive device Personality module aen01f.eps Figure 1. Replacing the Personality Module Maintenance Always store the module in its original, static protection bag when not in use. Clean the module case with a soft cloth dampened with water or water and a mild soap. Do not use abrasives, solvents, or alcohol. -
Page 5: Contacting Fluke Networks
Contacting Fluke Networks Visit the Fluke Networks website at www.flukenetworks.com. Send email to fluke-assist@flukenetworks.com. To order accessories or get the location of the nearest Fluke Networks distributor or service center, call: • USA: 1-888-993-5853 • Canada: 1-800-363-5853 • Europe: +31-402-678-200 •... - Page 6 LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke Networks product will be free from defects at the time of purchase. This warranty does not cover damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke Networks’...