EMPTYING THE INTERNAL WATER TANK
MANUAL DRAINAGE:
1.
When the internal water tank is full the unit will stop working and the water tank full light will
illuminate.
2.
Shut off the unit and unplug. Try not to move the model abruptly as this may cause water to
spill out from internal water tank.
3.
Place a tray under the water plug.
4.
Unscrew the water plug and unplug the water blocker - water will drain from the container.
5.
Put the water blocker back and screw the water plug back into place
CONTINUOUS DRAINAGE:
1.
Unscrew the water plug and unplug the water blocker.
2.
Use a water pipe to connect to the water outlet.
3.
You can plumb this pipe into your current plumbing system, lead it outside or use a water
pump. Note as the drainage is gravity fed, the pipe must run downhill.
NOTE:
•
This model has a self-evaporative function, which reduces the need to empty the water tank. If the unit
is vented correctly most of the water is reused to cool the condenser coils and any excess is evaporated.
Please do not use continuous drainage if you intend to use the self-evaporating facility.
• When using the unit in heating mode, it is advisable to use continuous drainage.
11