Table of Contents
Advertisement
USING THE PROJECTOR
Control menu
12V Trigger
Use this function to enable or disable the trigger.
‡
Off: Choose "Off" to disable the trigger.
‡
On: Choose "On" to enable the trigger.
Remote Settings
‡
IR Function: Set the IR function setting.
¾ Off: Choose "Off", the projector can't be operated by the remote control. By selecting "Off", you will
be able to use the Keypad keys.
¾ On: Choose "On", the projector can be operated by the remote control from the top and front IR
receivers.
‡
Remote Code: Set the remote custom code by pressing the remote ID button for 3 seconds and you will
notice the remote indicator (above the Off button) starts blinking. Then, input a number between 00-99
using the keyboard numbered keys. After inserting the number, the remote indicator blinks twice quickly
indicating that the remote code has changed.
‡
F1/F2/F3: Assign the default function for F1, F2, or F3 between Brightness (F3 default), Contrast (F2
default), Color Matching, Color Temp, Gamma (F1 default), Projection, or Lens Shift.
Projector ID: ID definition can be set up by menu (range 0-99), and allow user control an individual
‡
projector by using RS232 command.
‡
HDBaseT Control: Choose "On" to set the serial port path to RS232.
12V Trigger Output
Reserved
GND
55
English
Advertisement
Table of Contents
