Table of Contents
Advertisement
USING THE PROJECTOR
2. Frame tearing may occur due to a difference in frame rate between the Main and the Sub
picture, please try to match the frame rate for each input.
B)
PIP/PBP layout and size table as described below:
¾ P: indicates primary source region (lighter color).
PIP, Top Left
PIP, Top Right
PIP, Bottom Left
PIP, Bottom Right
PBP, Main Left
PBP, Main Top
PBP, Main Right
PBP, Main Bottom
Menu Settings
Set the menu location on the screen and configure menu timer settings.
Menu Location: Select the menu location on the display screen.
‡
‡
Menu Timer: Set the duration where the OSD menu stays visible on the screen.
Note:
When the PIP or PBP function is turned on, the Menu Location will be unavailable.
3D Menu
Note:
‡
This projector is a 3D ready projector.
‡
Please make sure your 3D glasses are use for DLP-Link 3D or VESA 3D.
‡
This projector supports frame sequential 3D via the HDMI 1 and HDMI 2 ports.
‡
The maximum resolution is 1080P (4K 3D resolution is not supported).
3D Mode
Use this option to enable or disable the 3D function.
Off: Select the "Off" to turn off 3D mode.
‡
‡
On: Select the "On" to turn on 3D mode.
PIP/PBP Layout
PIP/PBP Size
Small
Medium
Large
English
43
Advertisement
Table of Contents
