Chassis Intrusion Detection; Smart Card And Cac Reader - ATEN CS1188H-AT-E User Manual

ATEN Secure KVM User Manual
Scroll Lock LED Lights green to indicate the Scroll Lock is enabled

Chassis Intrusion Detection

To help prevent malicious tampering with the ATEN Secure KVM Switch, the switch becomes
inoperable and all front panel LEDs (except the Power LED) flash constantly when a chassis intrusion
(such as the cover being removed) is detected.
The intrusion detection feature is an always-on function. If all your front panel LEDs (except the Power
LED) flash continuously or the switch's enclosure appears breached, avoid using this product and
contact your ATEN dealer.

Smart Card and CAC Reader

The USB Smart Card / CAC reader function of each port can be enabled or disabled (enabled by
default). Press the port selection pushbutton for more than 3 seconds then release it, to enable/disable
the CAC reader function for that port (this is a toggle feature). The CA C LEDs are used to indicate the
CAC reader operation status.
If the CAC reader function is to be disabled for certain PCs, it's advised not to connect a USB CA C
cable to the installation.
20