Advertisement
2.
Connect one end of the RJ-45 cable to LAN interface of the CPE, and the other end
connect to PC.
3.
Insert DC-5V AC adaptor to the power interface.
4.
Power on.
3.3
Connect Network
Set CPE according to following steps:
1.
Open Internet Browser and type in the default IP address: https://192.168.1.1
2.
In the user name/password text box, type in the default user name and password,
admin/admin.
On the right corner of the page, there is the icon of signal strength, the two different
status is as follows:
LTE connects to Internet successfully. The signal indictor indicates the
strength of the LTE signal. The more bars turn light up, the stronger
signal, otherwise, the weak signal.
LTE does not connect to the Internet, please check whether the setting is
connect.
3.4
Connect Wi-Fi
Set CPE according to following steps in web page:
1.
Before establishing Wi-Fi connection, make sure your wireless terminal devices (such
as notebook, ipad, smart phone) have the WLAN function.
2.
When
is steady on, the WLAN function of CPE has enabled. If you need to
enable or disable the WLAN function, refer to help information in the web
management page.
3.
On the label of back view of the CPE, view the "WLAN Name" and "WLAN Key
(WPA/WPA2)" and record the value.
6
Advertisement
