Advertisement
2.2
Interface and Buttons
No.
Name
1
USIM card slot
2
Reset Button
3
TEL (RJ-11)
4
LAN (RJ-45)
5
DC-5V (power interface)
6
ON/OFF
2.3
RF Specification
Item
Mode
Insert the USIM card to the slot.
Press "Reset" button for 3s~20s, the CPE will
restore to the factory settings. Press "Reset" button
over 20 seconds, the CPE will enable the escape
mechanism.
TEL interface connects to Telephone by RJ-11
cable.
LAN interface connects to PC or other network
devices (such hub or switch) by RJ-45 Ethernet
cable.
Connect to the DC-5V AC adaptor.
ON/OFF the CPE.
Table 2-1 RF Specification
Description
TDD LTE
3
Description
Advertisement
