Table of Contents
Advertisement
en Basic operation
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 20
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.7 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press
.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
13.8 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press
To resume the programme, after
3.
the desired soaking time, press
.
13.9 Adding laundry
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Press
.
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry.
Add or remove laundry.
2.
Close the door.
3.
Press
.
4.
50
13.10 Cancelling the pro-
Once the programme has started,
you can cancel it at any time.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Press
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
– If the water level is high: Start
Remove the laundry.
3.
13.11 Resuming the pro-
.
Set the Spin or Drain programme.
1.
Press
2.
13.12 Unloading the laundry
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Open the door.
1.
gramme
.
the Rinse/Freshen Up pro-
gramme.
the Spin or Drain programme.
gramme when the pro-
gramme status is Rinse
Hold
.
Advertisement
Table of Contents
