Basic Operation; Switching On The Appliance; Setting A Programme; Adjusting The Programme Settings - Siemens WM4HXEE0DN User Manual And Installation Instructions

Table of Contents

Advertisement

en Basic operation

Basic operation

13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Press
.
It may take a few seconds for the
appliance to switch on.
a The appliance performs an audible
function test in the detergent
drawer.
Note: The drum is lit up after the
door is opened and closed and once
the programme has started. The light
goes out automatically.
13.2 Setting a programme
Set the programme selector to the
1.
required programme.
→ "Programmes", Page 30
If necessary, adjust the pro-
2.
gramme settings → Page 48.
48
Setting additional programmes
Set the ... further programme.
1.
Press
to call up the sub-
2.
menu for additional programmes.
Select a programme.
3.
Press Main menu to call up the
4.
main menu.
Adjust the programme settings if
5.
required.
Start the programme.
6.
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 48
Adjust the programme settings.
→ "Programmes", Page 30
Please follow the information about
operating logic → Page 20.
Notes
¡ The programme settings are not
saved permanently for the pro-
gramme.
¡ The setting is saved if you activate
or deactivate the intelligent dosing
system.
Adjusting additional programme
settings
Press
to call up the sub-menu
1.
for the additional programme set-
tings.

Advertisement

Table of Contents
loading

Table of Contents