Table of Contents
Advertisement
PRODUCT WHITE PAPER
www.elitescreens.com
4.5 Control System
1. 5-12V Trigger: The built-in 5-12V trigger input
allows your screen to synchronize its drop & rise
with the projector's power cycle. The screen
deploys when the projector powers up and will
retract when the projector powers down. The 5-12
volt adaptor connects to your projector's trigger
output via a separate cable that may or may not
be provided by the manufacturer of the projector.
The trigger feature will not work without an
output cable from the projector, but it can be
tested by connecting the Red (+) and Green (-)
cable to a 9-volt battery.
2. 3 -Way Wall Switch: The 3-way wall
switch is a wall mount control box with
an up/stop/down button and plugs
directly into the screen's RJ-45 input.
4. IR Remote Control: The Infrared
functions by direct line of sight contact
with a beam range of 30 feet.
Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S. A . S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp.
P
IR "Eye" Receiver
3-way Wall switch
Up
Up
Stop
Stop
Down
Down
Elite Screens Japan | Elite Screens Australia
3-prong power cable
Red: DC 12 +
Green: 0 V -
5-12 Volt Trigger Cable
3. IR "Eye" Receiver: The IR "Eye" Receiver plugs directly
into the screen's RJ-45 input to present a low profile line-
of-sight control option for your IR remote control even in
a recessed ceiling installation.
5. RF Remote Control: The radio waves
eliminate the need for a direct line of sight
with a range of 150 feet.
RJ-45 input for 5-12V Trigger
8
Advertisement
Table of Contents
