Table of Contents
Advertisement
PRODUCT WHITE PAPER
www.elitescreens.com
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur on a particular installation. If this equipment
causes harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
Reorient or relocate the receiving antenna of the device which may be casing the interference.
Increase the separation between the screen and the device's receiver.
Connect the equipment into a different power outlet other than the device.
4.3
Pre-Installation
1. Carefully unpack the screen.
2. Always handle the screen in a leveled position on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign
particles such as dust, sawdust, and/or liquids.
Regardless of the mounting method, the screen should be securely supported so that the vibration or
NOTE:
pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure that the
fasteners used are of adequate strength and suitable for the installation location.
4.4
Accessories
A. Infrared Remote
D. Infrared Eye Receiver
Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S. A . S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp.
P
B. Radio Frequency Remote
E. AAA Batteries
Elite Screens Japan | Elite Screens Australia
Red+
Green-
C. 12 volt Trigger
F. Bubble leveler
D. 3 Way Wall Switch
7
Advertisement
Table of Contents
