Insert Screw In The Front; Attach Bracket To Front Of Rack - Dell DD9500 Manual

CAUTION: If the bracket is mounted in holes that are not vertically aligned from front to back, the bracket
may be damaged and mounting will not be secure.
4. Pull the adjustable sliding part of the bracket towards the front until it is close to, but not touching, the front of the rack.
Figure 9. Insert screw in the front
5. Attach the front of the brackets with two screws each in the two middle holes (innermost holes) as shown in the picture.
Figure 10. Attach bracket to front of rack
6. Verify that the bracket is level.
7. Repeat the steps to attach the remaining bracket to the other side of the rack.
8. After installing both brackets, make sure that they are level with one another.
16 Install the System in the Rack