Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell P105F Service Manual

Steps
1. Place the power button on the slot on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x2) that secure the power button to the palm-rest and keyboard assembly.
3. Align the screw holes on the power-button shield with the screw holes on the palm-rest and keyboard assembly.
4. Replace the two screws (M2x2) that secure the power-button shield to the palm-rest and keyboard assembly.
Next steps
1. Install the system board.
2. Install the memory module.
3. Install the wireless card.
4. Install the solid-state drive
5. Install the solid-state drive
6. Install the rear cover
7. Install the battery.
8. Install the base cover.
9. Follow the procedure in

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the touchpad.
5. Remove the rear cover.
6. Remove the display assembly.
7. Remove the solid-state drive
8. Remove the solid-state drive
52 Removing and installing components
2.
1.
After working inside your
Before working inside your
.
2.
computer.
computer.