Remote Controller; Changing The Battery - Telefunken TF-LED32S2 Instruction Manual

Remote controller (RC)
1. POWER button
2. INPUT button
3. S.MODE button
4. P.MODE button
5. FREEZE button
6. SLEEP button
7. Numeric buttons
8. -/-- button
9. button
10. INFO button
11. VOL+/- buttons
12. PROG+/- buttons
13. MUTE button
14. MENU button
15. EXIT button
16. Cursor buttons (UP/DOWN/LEFT/RIGHT)/
ENTER button
17. TTX/ button
18. NICAM/ button
19. / buttons
20. button
21. button
22. INDEX/CH.LIST button
23. HOLD/FAV.LIST button
24. FAV+/- buttons
REVEAL/SUBPAGE buttons
25. SUBTITLE/GOTO button
26. CANCEL/A-B button
27. MIX/REPEAT button
28. ZOOM/SIZE button

Changing the battery

1. Remove the battery compartment cover
on the back of the RC.
2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.
Operation
7
AC 10
50/
7