Sound Setting; Option Setting; Screen Setting - Telefunken TF-LED32S2 Instruction Manual

Operation
Low/Middle/High.

Sound setting

SOUND
Move
• Sound mode: Standard/Music/Movie/
Sports/User.
• Treble: adjust treble frequency (only in
User sound mode).
• Bass: adjust bass frequency (only in User
sound mode).
• Balance: adjust balance between left and
right speaker.
• Auto volume: set the auto volume
correction on/off. It will level out the sound
volume when sudden changes in volume occur
during commercial breaks or channel change.
Time setting
TIME
Move
• Sleep timer: select the period until
automatic switch-off of the unit (10 - 240 min).
• Auto sleep: select the period of time after
which the unit will automatically switch off if no
operation is done.
• OSD timer: select the period of time after
which the OSD will be hidden.
10
10
Sound mode
Treble
Bass
Balance
Auto volume
Menu OK Exit
Sleep timer
Auto sleep
OSD timer
Menu OK Exit

Option setting

OSD language
TT language
Aspect ratio
OPTION
Blue screen
Key lock
Reset
Software upgrade (USB)
Move Menu
• OSD Language: select the language of
the OSD menu.
• TT Language: select teletext language.
• Aspect ratio: 4:3/16:9/Zoom1/Zoom2.
The set of available aspects can vary
depending on the current signal source.
• Blue screen: set on or off blue screen
activation when no signal.
• Key lock: select ON to lock all buttons on
the panel. Set OFF to unlock the buttons.
• Reset: reset the parameters to initial
factory settings.
• Software upgrade: this option is intended
for using by qualified technicians only.
Screen setting (only for PC mode)
Auto adjust
Horizontal Pos.
Vertical Pos.
SCREEN
Clock
Phase
Move Menu
• Auto adjust: automatical setting of the
parameters.
• Horizontal Position: adjust horizontal
position of the image.
• Vertical Position: adjust vertical position
of the image.
• Clock: adjust the image frequency
manually.
• Phase: adjust the phase manually.
OK Exit
OK Exit