Remote Controller; Changing The Battery - Telefunken TF-LED32S12T2 Instruction Manual

Remote controller (RC)
25
DMP INDEX
1. POWER button
2. INFO button
3. button
4. Number buttons
5. SOURCE/REVEAL (
6. AUDIO ( ) button
7. SIZE ( )/ZOOM (
8. RECALL ( ) button
9. MENU button
10. EXIT button
11. ENTER button
12. Cursor buttons (UP/DOWN/LEFT/RIGHT)
13. VOL+/VOL- buttons
14. CH+/CH- buttons
0
4
8
9
26
27
) button
) button
15. SLEEP button
16. LIST button
17. EPG button
18. button
19. Red button/ button
Green button/ button
Yellow button/ button
Blue button/ button
20. HOLD ( )/ STILL button
21. TEXT ( )/ button
22. SUBPAGE ( ) button
23. RADIO button
24. DMP button
25. CANCEL ( ) button
26. INDEX ( ) button
27. button

Changing the battery

1. Remove the battery compartment cover
on the back of the RC.
2. Insert the batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
1 2
• Use two AAA batteries for the RC. The RC
should be pointed at remote sensor within 8
meters and within 30 degrees at the left or the
right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.
Operation
3
7
7