Other Settings And Features; Auto Sorting Memory; Single Sideband (Ssb); Synchronous Detection (Sync) - Tecsun PL-368 Manual

Other Settings and Features

Auto Sorting Memory

This device can automatically organize all stored stations. In power off
mode, press and hold the [
indicator on the display starts running. This feature deletes duplicate
stations and sorts the sequence of stored stations from low to high
frequency.

Single Sideband (SSB)

When receiving longwave, medium wave (AM) and shortwave signals, you
can activate the SSB mode to receive particular signals like for example
amateur radio communication and Morse Code, but it can also help to
mitigate interference.
Enable/Disable SSB mode: Quick press [ LSB ] (lower sideband) or
[ USB ] (upper sideband) to enable the sideband. Quick press [ SSB ] to
disable SSB.

Synchronous Detection (SYNC)

When listening to longwave, medium wave (AM) and shortwave
broadcasts, turning on synchronous detection may reduce noise
interference, eliminate distortion caused by local fading during signal
transmission, and suppress interference caused by adjacent stations
(see page 23 for more information).
Enable/Disable SYNC detection:
1) Press and hold [ SYNC ], the display shows "
radio enters the synchronous detection mode.
2) Quick press [ LSB ] or [ USB ] to select Lower Sideband or Upper
Sideband SYNC detection.
3) To disable, quick press [ SYNC ] and "
Note: Enabling the SYNC detector does not always reduce interference.
] (0) button until the station memory preset
18
" and the
" disappears.