Deleting Stored Stations; Deleting A Single Station; Deleting Stations During Memory Scan - Tecsun PL-368 Manual

DELETING STORED STATIONS

Deleting a Single Station

1) Enter the memory (VM) mode and select the station that you wish to
delete.
2) Press and hold the [
flash on the display.
3) Quick press the [
station.
Note: If the [
the delete function is exited automatically.

Deleting Stations During Memory Scan

The device can auto scan all stored stations within a frequency band or
mode (SYNC/SSB), staying on each station for about 5 seconds, and
giving you the opportunity to delete any unwanted stored stations.
1) Select a frequency band or mode (SYNC/SSB).
2) Quick press [ VF/VM ] to enter the memory mode.
3) Press and hold the [ VF/VM ] button until "PRESET " flashes in the
upper right corner of the display. The device starts to scan all stored
stations and stays on each station for about 5 seconds before
continuing.
4) Upon finding an unwanted station, press the [
No confirmation is required and scanning continues immediately.
5) To stop the memory scan, quick press any button.
] (DEL.) button until "
] button to confirm and delete the unwanted
] button is not pressed for confirmation within 3 seconds,
13
" and "PRESET "
] (DEL.) button.