Deleting All Stored Stations; Enhanced Tuning Mode (Etm+): An Introduction - Tecsun PL-368 Manual

Deleting All Stored Stations

It is possible to delete all stations from the memory (including ETM)
simultaneously.
1) Turn the device off.
2) Press and hold the [
on the display.
3) Quick press the [ POWER ] button to confirm and delete all stored
stations.
4) Once the display returns to showing the clock time all stored
frequencies have been deleted.
Note: If the [ POWER ] button is not pressed for confirmation within 3
seconds, the delete function is exited automatically.

ENHANCED TUNING MODE (ETM+): AN INTRODUCTION

ETM+ allows you to auto tune and store FM, LW, MW and SW stations
into the ETM memory. Unlike ATS (Auto Tuning Storage), scanned
stations will not be stored into the regular memory (VM). In this way, when
you are in a different city or country, you can use the ETM+ function to
auto search new stations without overwriting any previously stored
stations within the memory.
Unlike its predecessor ETM (Easy Tuning Mode), ETM+ can also be used
for listening to LW, MW and SW stations more conveniently. Because
signals in these frequency bands may only be available during a specific
time of day, you can use this feature to make time-specific ETM memories.
] (DEL.) button untill "dEL" and "ALL" flash
14