Ozito PXBWK-130 Instruction Manual
Ozito PXBWK-130 Instruction Manual

Ozito PXBWK-130 Instruction Manual

Brushless impact wrench

Advertisement

Quick Links

BRUSHLESS
IMPACT WRENCH
INSTRUCTION MANUAL

SPECIFICATIONS

Voltage:
18V
No Load Speed:
0-2900/min
Drive Shaft:
12.7mm (1/2")
Impact Rate:
3000bpm
Max. Torque:
215Nm
Battery:
18V 3.0Ah Li-Ion
Charge Time:
60mins
Weight:
1.2kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

WARRANTY

The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
WHAT'S IN THE BOX
Brushless Impact
Wrench
10 x Sockets
3.0Ah Battery & Fast
Charger
PXBWK-130
0517

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXBWK-130 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXBWK-130

  • Page 1 3.0Ah Battery & Fast Weight: 1.2kg Charger ozito.com.au PXBWK-130 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION BRUSHLESS IMPACT WRENCH 1. ASSEMBLY (PXBWS-340) 1 1/2” Drive Shaft 4 Battery Seating 2 Tri-Beam LED Light 5 Forward/ Reverse Lever WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY 3 Variable Speed Trigger OF THE FOLLOWING TASKS.
  • Page 3 2. BATTERY & CHARGING Charging your lithium ion battery - Eco Charger CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD 1 Connect the charger into a mains power outlet. BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR LESS). 2 The charger LED will flash green showing power is being supplied Charging your lithium ion battery - Fast Charger...
  • Page 4 1 To drive screws and bolts, push the fwd/rev lever hard left. 5 Slowly increase pressure on trigger to appropriate torque for circumstances until bolt is 2 To remove screws and bolts, push tightened. the fwd/rev lever hard right. PXBWK-130...
  • Page 5 • When not in use, the impact wrench should be stored in a dry, frost free location not within the reach of children. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the impact wrench by an unauthorised person or by mishandling of the CARING FOR THE ENVIRONMENT impact wrench.
  • Page 6 The charger has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. This tools charger is double insulated therefore no earth wire is required.

Table of Contents