Ozito Power X Change PXBWS-340 Instruction Manual

Ozito Power X Change PXBWS-340 Instruction Manual

Brushless impact wrench

Advertisement

Quick Links

BRUSHLESS
IMPACT WRENCH
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage:
18V
No Load Speed:
0-2900/min
Drive Shaft:
12.7mm (1/2")
Impact Rate:
3000bpm
Max. Torque:
215Nm
Weight:
1.2kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
STANDARD EQUIPMENT
Brushless Impact
Wrench
PXBWS-340
0219

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power X Change PXBWS-340 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito Power X Change PXBWS-340

  • Page 1 3000bpm Max. Torque: 215Nm Weight: 1.2kg ozito.com.au PXBWS-340 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    GLOVES AS THEY ARE SHARP AND CAN BECOME HOT AFTER USE, POTENTIALLY CAUSING PERSONAL INJURY. BATTERY & CHARGER This tool is compatible with all battery and chargers from the Ozito Power X Change Range. ONLINE MANUAL Scan this QR Code with your mobile device to take you to the online manual.
  • Page 3: Operation

    OPERATION 2. BATTERY FITMENT 3. CONTROLS Variable Speed Trigger Inserting & Removing the Battery (not included) 1 To start the wrench, squeeze the 2 Release the variable speed 1 Align the ribs of the battery with variable speed trigger. trigger to stop the wrench. the recess at the base of the wrench handle and push in until it clicks into place.
  • Page 4: Driving Procedure

    4. DRIVING PROCEDURE 1 Depress and release the on/off 2 Check the forward/reverse lever trigger to ensure it is not locked. is on desired setting. 3 Ensure the work piece is secured to stop it turning whilst driving. 4 Hold the socket firmly against the bolt to stop it slipping.
  • Page 5: Troubleshooting

    • When not in use, the impact wrench should be stored in a dry, frost free location not within the reach of children. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the impact wrench by an unauthorised person or by mishandling of the...
  • Page 6: Electrical Safety

    The charger has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. This tools charger is double insulated;therefore no earth wire is required.
  • Page 7: Battery Safety Warnings

    Save these instructions and other documents supplied with this tool for future reference. DESCRIPTION OF SYMBOLS Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. This tools charger is double insulated therefore no earth wire is required.
  • Page 8 Australia 1800 069 486 tool) for the battery to reach its optimum performance / runtime. This battery is compatible with chargers from the 18V Ozito Power X Change range New Zealand 0508 069 486 available through your local Bunnings Warehouse. Product availability may differ.
  • Page 9 Save these instructions and other documents supplied with this tool for future reference. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. DESCRIPTION OF SYMBOLS This tools charger is double insulated therefore no earth wire is required.
  • Page 10: Charging A Battery

    The correct dimensions for drill holes can be found on the back of the charging unit; a on the tool. template for the mounting hole locations can also be found on the Ozito website. • If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.

Table of Contents