Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ozito IWC-4100
Summary of Contents for Ozito IWC-4100
- Page 1 WHAT’S IN THE BOX IMPACT WRENCH 950W Impact Wrench INSTRUCTION MANUAL SPECIFICATIONS Motor: 950W Input: 230-240V ~50Hz 4 x Impact Sockets No Load Speed: 2300/min Max Torque: 450Nm Drive Shaft: 1/2” (12.7mm) Rotation: Forward & Reverse Weight: 4.4kg ozito.com.au IWC-4100...
- Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION IMPACT WRENCH 1. ATTACHING ACCESSORIES 1 1/2” Drive Shaft 3 Sure Grip Handle 2 Forward/Reverse Trigger WARNING! ENSURE THE TOOL IS SWITCHEd Off ANd dISCONNECTEd fROM THE POWER SUPPLy bEfORE PERfORMING ANy Of THE fOLLOWING ASSEMbLy. Attaching Accessories 1 Align the socket with the drive shaft.
- Page 3 OPERATION 2. REMOVING ACCESSORIES 3. CONTROLS Removing Accessories CAUTION! TO REdUCE THE RISk Of ELECTRICAL SHOCk, THE USE Of A RESIdUAL CURRENT dEvICE 1 Pull the socket away (RATEd 30mA OR LESS) IS RECOMMENdEd. from the drive shaft to remove. forward/Reverse Trigger The impact wrench features a forward/reverse trigger which allows for loosening and tightening bolts.
- Page 4 5 Release the on/off trigger to stop the impact wrench. NOTE: WHEN USING THE IMPACT WRENCH fOR TIGHTENING, fIRST TIGHTEN THE bOLT OR NUT by HANd TO PREvENT dAMAGING THE THREAd. IWC-4100...
- Page 5 Spare parts can be ordered from the Special Orders desk at your local bunnings Warehouse. for further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer Service: CARING FOR THE ENVIRONMENT Australia 1800 069 486 New Zealand 0508 069 486 E-mail: enquires@ozito.com.au...
- Page 6 Model No. IWC-4100 How To Order Available spare parts can be ordered through the Special Orders Desk at any Bunnings Warehouse. If you have any further questions, please contact Ozito Customer Service on: Australia: 1800 069 486 New Zealand: 0508 069 486...
- Page 7 ELECTRICAL SAFETY WARNING! The power supply for this product should be protected by a residual current device (rated at 30mA or less). A When using mains-powered tools, basic safety precautions, including the residual current device reduces the risk of electric shock. following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage.
- Page 8 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0215...
Need help?
Do you have a question about the IWC-4100 and is the answer not in the manual?
Questions and answers