Front Panel; Rear Panel - Yamaha CL5 Owner's Manual

Hide thumbs Also See for CL5:
Table of Contents

Advertisement

Controls and functions

Front Panel

1
2
1
PHONES LEVEL knob
Adjusts the level of the signal output from the
PHONES Out jack.
2
PHONES Out (headphone output) jack
Lets you monitor the MONITOR OUT or CUE signal.

Rear Panel

1
2
6
7
8
1
LAMP connectors
Four-pin female XLR output jacks that supply power
to separately-sold gooseneck lamps (such as the
Yamaha LA1L). (The CL3 includes these connectors at
two locations. The CL1 includes one.)
2
MIDI IN/OUT connectors
Used to transmit and receive MIDI messages to and
from external MIDI devices. The MIDI IN connector
receives messages from an external device, and the
MIDI OUT connector transmits messages from the
CL unit.
These are used mainly to record CL parameter
operations or scene/library selections on an external
device, or to control CL parameters from an external
device.
3
WORD CLOCK IN/OUT connectors
BNC connectors used to transmit and receive word
clock signals to and from an external device. The
WORD CLOCK IN connector features internal
75-ohm termination.
4
GPI connector
D-sub 15-pin female connector that allows
communication (5-in/5-out) with a GPI-equipped
external device.
16
3
4
3
4
5
90
A
Owner's Manual
3
TALKBACK jack
A balanced XLR-3-31 jack to which a talkback mic
can be connected. You can make settings in the screen
to supply +48V phantom power to this jack. This jack
sends instructions from the mixer operator to the
desired output channel.
4
TALKBACK LEVEL knob
Adjusts the input level of the mic connected to the
TALKBACK jack.
B
C
5
DIGITAL OUT connector
An AES/EBU (XLR-3-32 male) jack that outputs the
digital audio signal of a desired channel in AES/EBU
format.
6
OMNI IN jacks
Balanced XLR-3-31 female input jacks that input
analog audio signals from line level devices or
microphones. Nominal input level is −62 dBu to
+10 dBu.
Male XLR plug
7
OMNI OUT jacks
XLR-3-32 male output jacks that output analog audio
signals. These jacks are used mainly to output the
signals of MIX channels or MATRIX channels.
Nominal output level is +4 dBu.
Female XLR plug
D F E
1 (Ground)
3 (Cold)
2 (Hot)
2 (Hot)
3 (Cold)
1 (Ground)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl3Cl1

Table of Contents