Table of Contents
Advertisement
CONFERENCE GUIDE
CONFERENCE GUIDE SETTINGS
When a multi-party call is going to be connected, a special signal (called flash or R-pulse)
is produced which transmits the command (enquiry, conference and return) to the PBX. It
may be necessary to change the type of signal if calls are connected via a PBX. Different
PBXs may require different signals. These requirements should be specified in the techni-
cal data for the PBX. Settings for the most common PBXs are listed on Konftel's website.
> CONF GUIDE > SETTINGS.
Select
Enter the command for a enquiry for a new dialling tone and press OK to confirm.
("F" is the default setting.)
Enter the command to connect everyone to a multi-party call and press OK to
confirm. ("F3" is the default setting.)
Enter the command to return to your original call and press OK to confirm.
("F1" is the default setting.)
If you experience problems making multi-party calls
Your PBX may not be programmed to admit multi-party calls or the procedure may be
different. Please contact your telephone administrator or service provider.
DISPLAYING CONFERENCE GUIDE STATUS
> CONF GUIDE > STATUS.
Select
The display screen indicates the number of conference groups already stored plus how many more
groups can be added.
22
Advertisement
Table of Contents
