Table of Contents
Advertisement
DURING A CALL
SWITCHING CONNECTIONS DURING CALLS
Adding a new connection during a call
You can add another connection or switch between connection during a call.
Press the
button during the call.
An indicator appears on the display screen in front of the selected connection.
Use the arrow buttons to mark the connection you want to activate and confirm your
choice by pressing OK.
If you selected USB or MOBILE, this connection will open. You then connect the call via the computer
or mobile phone.
If you selected DECT, you will hear a dialling tone. You then dial the number on the Konftel 300Wx or
use the Phonebook.
Press the
key again to close the connectivity menu.
Putting a connection on hold during a call
Press the
button during the call.
Use the arrow buttons to mark the connection you want to put on hold and press the
button.
The indicator in front of the selected connection starts to flash.
Repeat the above to reconnect the connection.
Press the
key again to close the connectivity menu.
Disconnecting a connection during a call
Press the
button during the call.
Use the arrow buttons to mark the connection you want to disconnect and confirm
your choice by pressing
The indicator in front of the selected connection goes out and the connection is disconnected. The
other calls can continue.
Press the
key again to close the connectivity menu.
.
18
Advertisement
Table of Contents
