4-2.Installation To The Computer - NEC N8103-104A User Manual

4-2.Installation to the computer

1. Confirm the power to the computer is off (power lamp off), then unplug the power cord from the
electrical outlet.
Notice
2. Remove the cover and other components of the computer if necessary following the
instructions in the user's manual of the computer.
3. Install this product in the PCI slot as following the instructions described in the user's manual of
the computer.
Check
If the power to the computer is on (power lamp on), shut down the operating
system and then turn off the computer.
The method of installing and removing the PCI card and the location of the PCI
slot differ in different computers. Please read the user's manual of the computer
for confirmation.
If this product is not correctly connected to the PCI slot of the computer, remove
the product and connect it again. Using excessive force can lead to damage.
- 30 -