4-2.Installation To The Computer - NEC N8103-104 User Manual

Sas controller
Hide thumbs

Advertisement

Table of Contents

4-2.Installation to the computer

1.
Confirm the power to the computer is off (power lamp off), then unplug the power cord from
the electrical outlet.
Notice
2.
Remove the cover and other components of the computer if necessary following the
instructions in the user's manual of the computer.
3.
Install this product in the PCI slot as following the instructions described in the user's manual
of the computer.
Check
4.
Replace the cover and components removed in item 2.
5.
Plug the power cord of the computer into the electrical outlet.
If the power to the computer is on (power lamp on), shut down the operating
system and then turn off the computer.
The method of installing and removing the PCI card and the location of the PCI
slot differ in different computers. Please read the user's manual of the computer
for confirmation.
If this product is not correctly connected to the PCI slot of the computer, remove
the product and connect it again. Using excessive force can lead to damage.
- 30 -

Advertisement

Table of Contents
loading

  Related Manuals for NEC N8103-104

Table of Contents