Safety Precautions - NEC N8103-104A User Manual

Safety Precautions

Please read and make sure you understand the warnings and cautions described below to use the product
safely. Please refer to "Safety Symbols" at the beginning for an explanation on the symbols.
Do not use the server for services where critical high availability may directly
affect human lives.
Your server is not intended to be used with or control facilities or devices
concerning human lives, including medical devices, nuclear facilities and
devices, aeronautics and space devices, transportation facilities and devices;
and facilities and devices requiring high reliability. NEC assumes no liability for any
accident resulting in personal injury, death, or property damage if the server has been
used in the above conditions.
Do not disassemble, repair, or alter the server.
When installing this product in the computer, please read the user's manual of the
computer and unplug the power plug from the electrical outlet. Do not insert or remove
the power plug with wet hands. Doing so can lead to faults or electric shock.
Do not pull on the lead when unplugging the power plug from the electrical outlet.
Doing so can damage the power cord and lead to shorting or electric shock.
Do not handle this product during an electrical storm.
When installing this product in the computer, please read the user's manual of the
computer and unplug the power plug from the electrical outlet. Do not insert or remove
the power plug with wet hands. Doing so can lead to faults or electric shock.
Do not pull on the lead when unplugging the power plug from the electrical outlet.
Doing so can damage the power cord and lead to shorting or electric shock.
Do not use the server if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the POWER/SLEEP switch
and disconnect the power plug from the outlet, then contact your sales agent. Using
the server in such conditions may cause a fire.
Do not pull the cable when disconnecting it.
When disconnecting the cable from the device, hold the cable connector/cable tag and
pull it straight out. Pulling the cable out by the cable portion or giving mechanical
stress to the connector could damage the cables and connectors to result in an
electrical shock hazard or a fire.
Avoid installation in extreme temperature conditions.
Immediately after the server is powered off, its internal components such as hard disks
are very hot. Leave the server until its internal components fully cool down before
installing/removing any component.
WARNING
CAUTION
- 5 -