Supermicro A+ Server AS-1124US-TNRP User Manual page 84

A+ Server AS -1124US-TNRP User's Manual
to keep all system event logs after each system reboot. The options are No, Yes, On next
reset, and Yes, On every reset.
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event
log is full. The options are Do Nothing and Erase Immediately.
Note: After making changes on a setting, be sure to reboot the system for the changes to
take effect.
BMC Network Configuration

BMC Network Configuration
Configure IPV4 Support
This section displays static configuration features for IPV4 support.
IPMI LAN Selection
This item displays the IPMI LAN setting. The default setting is Failover.
IPMI Network Link Status
This item displays the IPMI Network Link status. The default setting is Dedicated LAN.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next available
IP address for this computer. The options are DHCP and Static.
*If the item above is set to Static, the following items will become available for
configuration:
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal and
in dotted quad form.
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each three-
digit number separated by dots should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are 6 two-
digit hexadecimal numbers.
84