Table of Contents
Advertisement
A+ Server AS -1124US-TNRP User's Manual
11. Lower the heatsink down till it rests securely on CPU Package over the four screw
holes on the socket frame.
12. Using a diagonal pattern and a Torx T20 driver, tighten the four heatsink screws evenly
to 16.1 kgf-cm (14.0 lbf-in) of torque.
#3 Screw
The processor and heatsink installation is complete. Repeat this procedure for any remaining
CPU sockets on the motherboard.
Figure 3-10. Mounting the Heatsink
#1 Screw
Figure 3-11. Securing the Heatsink
32
#4 Screw
#2 Screw
Advertisement
Table of Contents
