Table of Contents
Advertisement
Installing an Expansion Card
1. Power down the system as described in section 3.1 and remove the cover.
2. Remove the bracket and sections of the chassis in the rear.
Figure 3-23. Riser Card Bracket and Expansion Slots
3. Insert the expansion card into a slot on the riser card while aligning the expansion card
backplate with the open slot in the bracket.
4. Insert the riser card into the motherboard expansion slot while aligning the riser card
bracket with the rear of the chassis. The riser card bracket is tool-less and has pins that
snap into holes on the rear of the chassis.
Chapter 3: Maintenance and Component Installation
47
Advertisement
Table of Contents
