Supermicro A+ Server AS-1124US-TNRP User Manual page 40

A+ Server AS -1124US-TNRP User's Manual
Installing a Drive
1. Insert a drive into the carrier with the PCB side facing down and the connector end
toward the rear of the carrier. Place the drive in the carrier so that the screw holes line
up.
2. The drive carrier has a tool-less design but you also have the option to secure the drive
to the carrier with two M3 screws. These screws are included in the chassis accessory
box.
3. Insert the drive carrier with the disk drive into its bay, keeping the carrier oriented so
that the hard drive is on the top of the carrier and the release button is on the right side.
When the carrier reaches the rear of the bay, the release handle will retract.
4. Push the handle in until it clicks into its locked position.
Figure 3-16. Mounting a Drive in the Carrier
40