WIRING DIAGRAM
QUICK CONNECTOR INSTRUCTIONS
To be sold only with installation instructions.
WARNING: Wiring must comply with all appliable electrical
codes. Turn OFF power before removing or installing
connectors.
WARNING: COPPER TO COPPER ONLY. Do not use
aluminum wire.
CAUTION: Accessory part (quick connector) should meet
installation instructions below.
NOTE: The connector is reusable on solid wires of the
same wire gauge or smaller. Do not reuse the connector on
stranded wires.
•
Strip wires 3/8 in. - 1/2 in.
•
Grip the wire firmly and push the stripped end of the
wire into the open port of the connector. Use only one
conductor per port.
•
Verify the stripped end of the wires is fully inserted to the
back of the connector.
NOTE: Important wire information. Maximum temperature
rating 221˚F (105˚C). 600 volts maximum for building wire
and 1,000 volts maximum for building wire and 1,000 volts
maximum in signs and lighting fixtures. The acceptable wire
range includes: Solid: 12-18 AWG.
House
wires
JUNCTION BOX
ON/OFF SWITCH
SWITCH BOX
(purchase separately)
POWER
SWITCH
120 VAC
5
Quick
connector
Product
wires
SWITCH BOX
OFF
BLACK
ON
WHITE
POWER SWITCH
GREEN
BLACK
WHITE
GROUND
(bare)
WIRING
PLATE
LINE IN
L
N
GRD