After Installing The Hob, Make Sure That; Before Locating The Fixing Brackets; Adjusting The Bracket Position - Nordmende HCI901FL Instruction Manual

9.3 After installing the hob, make sure that

 The power supply cable is not accessible through cupboard doors or
drawers.
 There is adequate flow of fresh air from outside the cabinetry to the base of
the hob.
 If the hob is installed above a drawer or cupboard space, a thermal
protection barrier is installed below the base of the hob.

The isolating switch is easily accessible by the customer.

9.4 Before locating the fixing brackets

The unit should be placed on a stable, smooth surface (use the packaging). Do
not apply force onto the controls protruding from the hob.

9.5 Adjusting the bracket position

Fix the hob on the work surface by screw 2 brackets on the bottom of hob(see
picture) after installation.
Adjust the bracket position to suit for different table top thickness.
33