HIKVISION HIK-7104NI Manual page 63

Steps
1. Add Wi-Fi cameras to the device through wireless network. Refer to Add Wi-Fi Camera for
details.
2. Go to Menu → Configuration → Camera .
3. Turn on the switch(s) in Auto Repeater of Wi-Fi camera(s) as your desire.
Note
The repeater camera and repeated camera shall both enable this function.
●
Only two layers are allowed for the topology.
●
4. Optional: Click Enable Repeater or Disable Repeater to enable or disable the repeater function
of all cameras.
View Camera Topology
Install your Wi-Fi cameras to the destinations. According to Wi-Fi signal strength, Wi-Fi cameras
will automatically form a logical network topology, you can view the connection topology and
status in Menu → Configuration → Camera → Camera Topology .
Network Video Recorder
Figure 6-9 Configure Camera as Repeater
50